PLANET WGSW-52040 - Manual (Page 114)

3. Enter port-channel configuration mode.
Command Explanation
Global Mode
interface port-channel
Enter port-channel configuration mode.
4. Set load-balance method for port-group
Command Explanation
Aggregation port configuration mode
load-balance {src-mac | dst-mac | dst-src-mac |
src-ip | dst-ip | dst-src-ip}
Set load-balance for port-group.
5. Set the system priority of LACP protocol
Command Explanation
Global mode
lacp system-priority <system-priority>
no lacp system-priority
Set the system priority of LACP
protocol, the no command restores
the default value.
6. Set the port priority of the current port in LACP protocol
Command Explanation
Port mode
lacp port-priority <port-priority>
no lacp port-priority
Set the port priority in LACP protocol.
The no command restores the default
value.
7. Set the timeout mode of the current port in LACP protocol
Command Explanation
Port mode
lacp timeout {short | long}
no lacp timeout
Set the timeout mode in LACP
protocol. The no command restores
the default value.
12-36