PLANET WGSW-52040 - Manual (Page 100)

Global configuration mode
uldp hello-interval
no uldp hello-interval
Configure the interval of Hello messages,
ranging from 5 to 100 seconds. The value
is 10 seconds by default.
7. Configure the interval of Recovery
Command Explanation
Global configuration mode
uldp recovery-time
no uldp recovery-time
Configure the interval of Recovery reset,
ranging from 30 to 86400 seconds. The
value is 0 second by default.
8. Reset the port shut down by ULDP
Command Explanation
Global configuration mode or port
configuration mode
uldp reset
Reset all ports in global configuration
mode;
Reset the specified port in
port configuration mode.
9. Display and debug the relative information of ULDP
Command Explanation
Admin mode
show uldp [interface ethernet IFNAME]
Display ULDP information. No parameter
means to display global ULDP information.
The parameter specifying a port will display
global information and the neighbor
information of the port.
debug uldp fsm interface ethernet
<IFname>
no debug uldp fsm interface ethernet
>
Enable or disable the debug switch of the
state machine transition information on the
specified port.
debug uldp error
no debug uldp error
Enable or disable the debug switch of error
information.
10-22