PLANET WGSW-52040 - Manual (Page 59)

snmp-server securityip enable
snmp-server securityip disable
Enable or disable secure IP address check
function on the NMS.
4. Configure engine ID
Command Explanation
Global Mode
snmp-server engineid
no snmp-server engineid
Configure the local engine ID on the switch.
This command is used for SNMP v3.
5. Configure user
Command Explanation
Global Mode
snmp-server user
[{authPriv | authNoPriv}
auth {md5 | sha} ] [access
{|}] [ipv6-access
{|}]
no snmp-server user
[access {|}]
[ipv6-access
{|}]
Add a user to a SNMP group. This command
is used to configure USM for SNMP v3.
6. Configure group
Command Explanation
Global Mode
snmp-server group
{noauthnopriv|authnopriv|authpriv} [[read
] [write ] [notify
]] [access
{|}] [ipv6-access
{|}]
no snmp-server group
{noauthnopriv|authnopriv|authpriv}
[access {|}]
[ipv6-access
Set the group information on the switch. This
command is used to configure VACM for
SNMP v3.
4-12