PLANET WGSW-52040 - Manual (Page 320)

ip igmp snooping vlan
query-robustness <value>
no ip igmp snooping vlan
query-robustness
Configure the query robustness. The “no ip
igmp snooping vlan
query-robustness” command restores to the
default value.
ip igmp snooping vlan <vlan-id>
suppression-query-time <value>
no ip igmp snooping vlan <vlan-id>
suppression-query-time
Configure the suppression query time. The
“no ip igmp snooping vlan <vlan-id>
suppression-query-time” command
restores to the default value.
ip igmp snooping vlan <vlan-id>
static-group [source
] interface [ethernet |
port-channel]
no ip igmp snooping vlan <vlan-id>
static-group [source
] interface [ethernet |
port-channel]
Configure static-group on specified port of the
VLAN. The no form of the command cancels
this configuration.
ip igmp snooping vlan <vlan-id> report
source-address <A.B.C.D>
no ip igmp snooping vlan <vlan-id>
report source-address
Configure forwarding IGMP packet source
address, The no operation cancels the packet
source address.
ip igmp snooping vlan
specific-query-mrsp
no ip igmp snooping vlan
specific-query-mrspt
Configure the maximum query response time
of the specific group or source, the no
command restores the default value.
38.3.3 IGMP Snooping Examples
Scenario 1: IGMP Snooping function
38-99