TA Triumph-Adler DC 2435 - Manual (Page 70)

Preparation before Use
2-24
Embedded Web Server RX (Settings for E-mail)
Embedded Web Server RX is a tool used for tasks such as verifying the operating status of the machine and
changing the settings for security, network printing, E-mail transmission and advanced networking.
NOTE: Here, information on the FAX settings has been omitted. For more information on using the FAX, refer
to the Fax System (V) Operation Guide.
The optional Fax Kit is required in order to make use of fax functionality.
To change settings in Embedded Web Server RX, you must log in as an administrator of the machine.
The default factory settings are set as shown below.
Login User Name: Admin
Login Password: Admin
* Upper case and lower case letters are distinguished (case sensitive).
The procedure for accessing Embedded Web Server RX is explained below.
1 Launch your Web browser.
2 In the Address or Location bar, enter the machine’s IP address.
e.g.) http://10.183.51.41/
The web page displays basic information about the machine and Embedded Web Server RX as well as their
current status.
3 Select a category from the navigation bar on the left of the screen. The values for each category must be
set separately.
If restrictions have been set for Embedded Web Server RX, enter the correct user name and password to
access pages other than the startup page.
For details, refer to the Embedded Web Server RX Operation Guide.