TA Triumph-Adler DC 2435 - Manual (Page 388)

Default Setting (System Menu)
9-90
Application
You can install and use applications that will make your day-to-day use of this machine more efficient.
Installing Applications
You can install new applications.
Use the procedure below to install an application.
1 Insert the USB memory containing the application to be installed into the USB Port (A1).
NOTE: If Removable Memory was recognized. Displaying files. appears, press [No].
2 Press the System Menu key.
3 Press [ ] and then [Application].
NOTE: If the user authentication screen appears, enter your login user name and password and then press
[Login]. For this, you need to login with administrator privileges. Refer to Adding a User (Local User List) on
page 10-5 for the default login user name and password.
4 Press [Add].
5 Select the application to be installed and press [Install].
You can view detailed information on the selected application by pressing [Detail].
6 When the confirmation screen appears, press [Yes].
Installation of the application begins. Depending on the application being installed, the installation may take
some time.
Once the installation ends, the original screen reappears.
7 To install another application, repeat steps 5 to 6.
8 To remove the USB memory, press [Remove Memory] and wait until the Removable Memory can be safely
removed message appears. Then remove the USB memory.