Ge 9-20, E 9-20) – TA Triumph-Adler DC 2435 User Manual
Page 318
Default Setting (System Menu)
9-20
BackgrndDens.(Send/Store)
Select the default background density for sending and storing in a document box. The available default settings
are shown below.
Use the procedure below to select the default BackgrndDens.(Send/Store).
1
Press the System Menu key.
2
Press [Common Settings], [
], [Next] of Function Defaults, [
] and then [Change] of
BackgrndDens.(Send/Store).
3
Select the default BackgrndDens.(Send/Store).
4
Press [OK].
Prevent Bleed-thru (Copy)
Set the default Prevent Bleed-thru (Copy).
Use the procedure below to select the default Prevent Bleed-thru (Copy).
1
Press the System Menu key.
2
Press [Common Settings], [
], [Next] of Function Defaults, [
] and then [Change] of Prevent Bleed-thru
(Copy).
3
Set the default Prevent Bleed-thru (Copy).
4
Press [OK].
Prevent Bleed(Send/Store)
Set the default Prevent Bleed(Send/Store).
Item Description
Off
Do not adjust background density.
Auto
Set to auto adjustment.
Manual (Darker 5)
Set to (Darker 5) in manual adjustment.
Item Description
Off
Do not reduce show-through.
On
Reduce show-through.
Item Description
Off
Do not reduce show-through.
On
Reduce show-through.