E 9-19) – TA Triumph-Adler DC 2435 User Manual
Page 317
Default Setting (System Menu)
9-19
9
NOTE:
Refer to page 6-14 for file formats.
Use the procedure below to select the default file format.
1
Press the System Menu key.
2
Press [Common Settings], [
], [Next] of Function Defaults and then [Change] of File Format.
3
Select the default file format.
4
Press [OK].
File Separation
Select the default file separation setting. The available default settings are shown below.
NOTE:
Refer to page 6-15 for file separation.
Use the procedure below to select the default file separation.
1
Press the System Menu key.
2
Press [Common Settings], [
], [Next] of Function Defaults and then [Change] of File Separation.
3
Select the default for [Off] or [Each Page].
4
Press [OK].
Backgrnd Density (Copy)
Set the default Backgrnd Density (Copy). The available default settings are shown below.
Use the procedure below to select the default Backgrnd Density (Copy).
1
Press the System Menu key.
2
Press [Common Settings], [
], [Next] of Function Defaults, [
] and then [Change] of Backgrnd Density
(Copy).
3
Select the default Backgrnd Density (Copy).
4
Press [OK].
Item Description
Off
No file separation performed (all the pages are compiled in one file).
Each Page
Each scanned page is created into a separate file.
Item Description
Off
Do not adjust background density.
Auto
Set to auto adjustment.
Manual (Darker 5)
Set to (Darker 5) in manual adjustment.