TA Triumph-Adler DC 2435 - Manual (Page 348)

Default Setting (System Menu)
9-50
To search for and register a folder on a PC on the network, press [Search SMB Host] or [Windows Network].
If you pressed [Search SMB Host], enter the "Domain/Workgroup" and "Host Name" to search the PCs on
the network.
If you pressed [Windows Network], all PCs on the network are searched. A maximum of 500 addresses can
be displayed. Select the host name (PC name) that you want to specify in the screen that appears, and
press [Next]. The login user name and login password entry screen appears. After you enter the login user
name and login password name, the shared folders appear. Select the folder that you want to specify and
press [Next]. The address of the selected shared folder is set.
NOTE: Refer to the Character Entry Method on page Appendix-9 for details on entering characters.
Press [Connection Test] to check the connection to the server you chose. If the connection fails, check the
entries you made.
4 Check if the destination entry is correct and press [OK]. The destination is added to the Address Book.
Color Setting
Color settings for forwarded transmission copies can be set.
The settings are described below.
NOTE: All jobs sent by Network FAX are forwarded in black & white.
Use the procedure below to set the default Color setting.
1 Press the System Menu key.
2 Press [Send] > [Next] of Send and Forward > [Change] of Color setting.
3 Select the scanning color mode.
4 Press [OK].
Item Detail
Auto Color
(Color/Gray) Automatically select full color or grayscale.
Auto Color
(Color/B & W) Automatically select full color or black & white.
Full Color Forward in full color.
Grayscale Forward in grayscale.
Black & White Forward in black & white.