TA Triumph-Adler DC 2435 - Manual (Page 341)

Default Setting (System Menu)
9-43
9
Auto Image Rotation Action
Set whether the image is rotated when the orientation of the document to be printed is different from the
orientation of the paper.
NOTE: This function is only enabled when Auto Image Rotation for the copy function (page 4-38) is set to
[On].
The table below shows the available settings.
The procedure is as follows.
1 Press the System Menu key.
2 Press [Copy] and [Change] of Auto Image Rotation Action.
3 Select [Unrotated Manual Copy], [Apply All], or [Follow Image Size].
4 Press [OK].
Auto Paper Selection
If [Auto] is selected for Paper Selection, set the paper size selection method when the zoom changes. The table
below shows the available settings.
IMPORTANT: If you want to enable the changed defaults immediately, move to the function screen and press
the Reset key.
Use the procedure below to specify the action performed for Auto Paper Selection.
1 Press the System Menu key.
2 Press [Copy] and [Change] of Auto Paper Selection.
3 Press [Most Suitable Size] or [Same as Original Size].
4 Press [OK].
Item Description
Unrotated
Manual Copy If a paper source or zoom ratio is specified, the image is not rotated.
Apply All Rotates all images.
Follow Image
Size The image is rotated if the rotated image fits on the paper.
Item Description
Most Suitable Size Select paper based on the current zoom and the size of the original.
Same as Original Size Select paper that matches the size of the original, regardless the zoom.