TA Triumph-Adler DC 2435 - Manual (Page 249)

Sending Functions
6-37
6
Send and Print
When you send originals, this feature allows you to print a copy of the document being sent.
The procedure for using Send and Print is explained below.
1 Press the Send key.
2 Place the originals on the platen.
3 Press [Advanced Setup] and then [Send and Print].
4 Press [On].
5 Press [OK].
6 Specify the destination and press the Start key.
Transmission begins and a copy of the transmitted
document is printed.
Send and Store
When you send originals, this feature allows you to store a copy of the document being sent in a Custom Box.
The procedure for using Send and Store is explained below.
1 Press the Send key.
2 Place the originals on the platen.
3 Press [Advanced Setup], [ ], and then [Send and
Store].
4 Press [On].
5 Select the Custom Box in which the copy is to be
stored.
If a password entry screen for the Custom Box
appears, enter the password.
You can view information on the selected Custom
Box by pressing [Detail].
6 Press [OK].
7 Specify the destination and press the Start key.
Transmission begins and a copy of the transmitted
document is stored in the specified Custom Box.
Send and Store
Off
On
No. Name Used
2/2
Cancel OK Add Shortcut
Status
Destination
0006 Box 6MB
0007 Box 4MB
0008 Box 8MB
0009 Box 4MB
0010 Box 2MB
Custom Box
Detail
10/10/2010 10:10