beautypg.com

E 9-14) – TA Triumph-Adler DC 2435 User Manual

Page 312

background image

Default Setting (System Menu)

9-14

Punch Waste Full Error

Select what to do when the punch waste box becomes full during printing.

NOTE:

This setting is displayed when an optional 4,000-sheet finisher and a hole punch unit are installed.

Paper Mismatch Error

Select what to do when the selected paper size or type does not match paper size or type loaded in the specified
paper source while printing from the computer by specifying the cassette or multi-purpose tray.

Inserted Paper Mismatch

Select what to do when it is detected that the cassette paper size setting does not match the actual paper size
that is fed.

Paper Jam before Staple

The page from which printing is resumed when a paper jam occurs during a job with stapling can be selected.

NOTE:

This setting is displayed when an optional 1,000-sheet finisher or 4,000-sheet finisher is installed.

Skewed originals

When skewed originals while scanning, select whether to scan by ignoring the error or display an error.

NOTE:

This setting is displayed when an optional document processor (dual scan DP) is installed.

Item

Description

Ignore

Printing continues without punching.

Display Error

Error message to cancel printing is displayed.

Item

Description

Ignore

The setting is ignored and the job is printed.

Display Error

Error message to cancel printing is displayed.

Item

Description

Ignore

Detection does not take place and the job is printed.

Display Error

Error message to cancel printing is displayed.

Item

Description

Resume at Top of
Page

Resume printing from the first page of the document.

Resume at Jammed
Page

Resume printing from the page where the jam occurred.

Item

Description

Ignore

Detection does not take place and the job is scanned.

Display Error

Error message to cancel scanning is displayed.

This manual is related to the following products: