TA Triumph-Adler DC 2435 - Manual (Page 469)

Troubleshooting
12-3
12
Printouts are too dark. Have you changed the
density? Select appropriate density level. 3-9
9-68
— Run [Calibration]. 9-74
— Run [Drum Refresh1]. 9-72
— Run [Developer Refresh]. 9-73
Copies have a moire
pattern (dots grouped
together in patterns
and not aligned
uniformly). Is the original a printed
photograph? Set the image quality to [Printer
Output] or [Book/Magazine] in
[Photo]. 3-9
Printouts are not
clear. Did you choose appropriate
image quality for the original? Select appropriate image quality. 3-9
Dirt on the print side
of the paper. Is the platen or the document
processor dirty? Clean the platen or the document
processor. 11-15
Is the conveying guide dirty? Clean the conveying guide. 11-18
— Run [Drum Refresh1]. 9-72
— Run [Developer Refresh]. 9-73
Printouts are fuzzy. Is the machine being used in
very humid conditions? Use in an environment that has
suitable humidity. —
— Run [Drum Refresh1]. 9-72
Images are skewed. Are the originals placed
correctly? When placing originals on the
platen, align them with the original
size indicator plates. 2-45
When placing originals in the
optional document processor, align
the original width guides securely
before placing the originals. 2-45
Is the paper loaded
correctly? Check the position of the paper
width guides. 2-28
Symptom Checkpoints Corrective Actions
Reference
Page