TA Triumph-Adler DC 2435 - Manual (Page 188)

Copying Functions
4-32
4 Press [On].
5 Press [Date], [User Name], [Serial Number],
[Numbering], [Text 1], or [Text 2], and set additional
information to be printed in the stamp.
If you selected [Text 1] or [Text 2], press [Change]
below it and enter the text string to be printed.
If you selected [Date], press [Date Format] and
select [MM/DD/YYYY], [DD/MM/YYYY], or [YYYY/
MM/DD] to set the date format.
If you selected [Numbering], press [Numbering
Default] and set the starting sequence number (1 to
9999999).
6 Press [Position] and select the position of the bates
stamp.
7 Press [Font] and select font and display settings for
the bates stamp.
8 Press [Original Orientation] to choose the
orientation of the originals, either [Top Edge on Top]
or [Top Edge on Left]. Then press [OK].
9 Press [OK].
10 Press the Start key. Copying begins.
Status
Copies
Cancel OK
Bates Stamp
Add Shortcut
On
Off
Stamp
Date User Name
Numbering
Default Position Font Original
Orientation
1 Top Left pt
Black
9 Top Edge
on Top
Numbering Text 1
Serial Number
Text 2
Delete
Text 1 Text 2
Change Change Date Format
10/10/2010 10:10
[Date] 1/6