TA Triumph-Adler DC 2435 - Manual (Page 121)

Basic Operation
3-27
3
7 Press [Next Dest.] and repeat steps 4 to 6 to
specify the destination. You can specify a
combined total of up to 10 FTP and SMB
destination folders.
NOTE: When [Add to Addr Book] is displayed, the
entry is registered in the Address Book.
8 Press [OK] to register the entry in the destination
list.
9 Check the destination list.
Select a destination and press [Detail/Edit] to check
and edit it. Edit it, if necessary, referring to steps 4
to 6.
Select a destination and press [Delete] to remove
the destination from the list.
NOTE: When selecting [On] for Entry Check for New
Destination (page 9-47), the confirmation screen
appears. Enter the same host name and path again,
and press [OK].
When selecting [On] for Destination Check before Send
(page 9-46), the confirmation screen appears after
pressing the Start key. For details, refer to Confirmation
Screen of Destinations on page 3-28.
10 Press the Start key. Sending begins.
Status
Destination Detail
ABCD [email protected]
Address
Book
Folder Path
Entry
E-mail
Addr Entry
No.
1/100
AAA BBB CCC DDD
FFF GGG HHH III JJJ
0004 0003 0005 0001 0002
0006 0007 0008 0009 0010
1/1
i-FAX
Addr Entry
FAX No.
Entry
Destination
TUVW 192.168.188.120
Group1 Group1
EEE
Detail/Edit Delete Recall Chain Direct On Hook
Org./Sending
Data Format
Quick Setup Destination Color/
Image Quality
Advanced
Setup
Program
10/10/2010 10:10
WSD Scan
/DSM Scan