Ecoprint, Toner savelevel(ecoprint), Override a4/letter – TA Triumph-Adler DC 2435 User Manual
Page 357: E 9-59), Ge 9-59), Ecoprint …9-59, Toner savelevel(ecoprint) …9-59, Override a4/letter …9-59
Default Setting (System Menu)
9-59
9
EcoPrint
EcoPrint conserves toner when printing. This is recommended for test copies where lighter printing is not a
problem.
Use the procedure below to specify the EcoPrint setting.
1
Press the System Menu key.
2
Press [Printer] and [Change] of EcoPrint.
3
Press [Off] or [On].
4
Press [OK].
Toner SaveLevel(EcoPrint)
Select the default Toner SaveLevel(EcoPrint). One of five levels [1] - [5] can be set.
NOTE:
Raising the level reduces toner consumption, but image quality falls.
Use the procedure below to select the default Toner SaveLevel(EcoPrint).
1
Press the System Menu key.
2
Press [Printer] and [Change] of Toner SaveLevel(EcoPrint).
3
Select from [1] to [5] for the default Toner SaveLevel(EcoPrint).
4
Press [OK].
Override A4/Letter
Select whether to treat A4 size and Letter, which are similar in size, as the same size when printing. The table
below shows the available settings.
Use the procedure below to specify the override A4/Letter setting.
1
Press the System Menu key.
2
Press [Printer] and [Change] of Override A4/Letter.
3
Press [Off] or [On].
4
Press [OK].
Item
Description
On
A4 and Letter are regarded as the same in size. The machine will
use whichever size is in the paper source.
Off
A4 and Letter are not regarded as the same in size.