Protocol detail, E 9-98), Protocol detail …9-98 – TA Triumph-Adler DC 2435 User Manual
Page 396
Default Setting (System Menu)
9-98
Protocol Detail
The table below lists the network related function settings. The network related functions are available when
TCP/IP is On.
Item
Description
Default
Setting
Restarting
the System*
*
Y
: The machine must be restarted after the setting is changed.
N
: The machine does not need to be restarted after the setting is changed.
NetBEUI
Selects whether or not to receive documents using
NetBEUI.
On
Y
LPD
Select whether or not to receive documents using LPD as
the network protocol.
On
Y
SMTP
(E-mail TX)
Select whether or not to send e-mail using SMTP.
Off
N
POP3
(E-mail RX)
Select whether or not to receive e-mail using POP3.
Off
N
FTP Client
(Transmission)
Select whether or not to send documents using FTP.
When selecting [On], set the FTP Port Number. Use the
FTP default port 21.
On
Port:21
N
FTP Server
(Reception)
Select whether or not to receive documents using FTP.
On
Y
SMB Client
(Transmission)
Select whether or not to send documents using SMB.
When selecting [On], set the SMB default Port Number.
Use the SMB default port 139. For Windows Vista, use 445.
On
Port:139
N
i-FAX
Select whether or not to use i-FAX.
On
N
LDAP
Select whether or not to use LDAP.
Off
N
SNMP
Select whether or not to communicate using SNMP.
On
Y
SNMPv3
Select whether or not to communicate using SNMPv3.
Off
Y
HTTP
Select whether or not to communicate using HTTP.
On
Y
HTTPS
Select whether or not to communicate using HTTPS.
SSL must be set to [On] in SSL on page 9-101.
On
Y
IPP
Select whether or not to communicate using IPP. When
selecting [On], set the IPP default Port Number. Use the
IPP default port 631.
Off
Port:631
Y
IPP over SSL
Select whether or not to use IPP over SSL.
SSL must be set to [On] in SSL on page 9-101.
Off
Y
Raw Port
Select whether or not to communicate using Raw Port.
On
Y
ThinPrint
(UG-31)
Select whether or not to communicate using ThinPrint. If set
to [On], you can set the port number that ThinPrint uses.
Normally 4,000 is used. SSL settings can also be selected.
On
Y
DSM Scan
Select whether or not to use DSM.
Off
N