Interrupt clear timer, Error job skip, E 9-79) – TA Triumph-Adler DC 2435 User Manual
Page 377: Interrupt clear timer …9-79, Error job skip …9-79
Default Setting (System Menu)
9-79
9
Interrupt Clear Timer
Set the period after which the machine reverts to Normal mode when it has been set to Interrupt Copy mode
and then left unused. Any period between 5 and 495 seconds (in five-second increments) can be set.
The procedure for setting the interrupt clear timer is explained below.
1
Press the System Menu key.
2
Press [
], [Date/Timer], [
] and then [Change] of Interrupt Clear Timer.
3
Press [+] or [-] to enter the time for the interrupt clear timer.
4
Press [OK].
Error Job Skip
Set whether a job for which a "Add paper in cassette #" or "Add paper in Multi Purpose tray" error occurred when
the job was started is automatically skipped after a set period of time elapses. The period of time can be set
within the range 5 to 90 seconds (increments of 5 seconds).
NOTE:
When a job is skipped, it is moved to the end of the job queue.
The procedure for setting the Error Job Skip is explained below.
1
Press the System Menu key.
2
Press [
], [Date/Timer], [
] and then [Change] of Error Job Skip.
3
Press [Off] or [On].
4
If you selected [On], set the time until the job is skipped with [+] or [-].
5
Press [OK].