TA Triumph-Adler DC 2435 User Manual
Page 477
Troubleshooting
12-11
12
*
When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Error Message
Checkpoints
Corrective Actions
Reference
Page
Hard Disk error.
—
An error has occurred on the hard
disk. Job is canceled. Press [End].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been
exceeded. Restart the system or
turn the power OFF/ON. If the
error still occurs, divide the file
into smaller files. If the error
occurs after the file is divided, the
hard disk is damaged. Execute
[System Initialization].
04: Insufficient space on the hard
disk to complete this operation.
Move data or delete unneeded
data.
—
Incorrect account ID.
—
The account ID was incorrect when
processing the job externally. The job
is canceled. Press [End].
—
Incorrect box
password.
—
The box password was incorrect
when processing the job externally.
The job is canceled. Press [End].
—
Incorrect Login User
Name or Password.
—
The login user name or password
was incorrect when processing the
job externally. The job is canceled.
Press [End].
—
Incorrect password.
Is an incorrect password
entered?
Enter the correct password.
―
Install the punch
waste box.
—
Follow the instructions on the touch
panel and install the punch waste
box.
—
Job separator tray is
full of paper.
Is the acceptable storage
capacity exceeded?
Remove the paper and press
[Continue]. Printing then resumes.
—
Job Accounting
restriction exceeded.*
Is the acceptable printing
count restricted by Job
Accounting exceeded?
The printing count exceeded the
acceptable count restricted by Job
Accounting. Cannot print any more.
This job is canceled. Press [End].
—