TA Triumph-Adler DC 2435 - Manual (Page 531)

Appendix-13
Basic Paper Specifications
This machine is designed to print on standard copy paper as used in regular ('dry') copiers and page printers
such as laser printers. It also supports a variety of other types of paper that conform to the specifications given
in this appendix.
Be careful when choosing paper. Paper unsuitable for the machine may cause jams or may be wrinkled.
Supported Paper
Use standard copy paper for regular copiers or laser printers. The printing quality will be affected by the quality
of paper. Poor quality paper may result in unsatisfactory output.
Basic Paper Specifications
The following table lists the specifications of paper that is supported with this machine. Refer to the subsequent
sections for further details.
NOTE: Some recycled paper does not meet requirements for use with this machine as listed in the Basic
Paper Specifications shown below, such as moisture or pulp content. For this reason, we recommend
purchasing a small amount of recycled paper as a sample for testing prior to use. Choose recycled paper that
gives the best printing results and contains low levels of paper dust.
We are not responsible for the problems occurred from the use of paper that does not conform to our
specifications.
Envelopes Envelope DL, Envelope C5, Envelope C4,
Envelope #10 (Commercial #10),
Envelope #9 (Commercial #9),
Envelope #6 (Commercial #6 3/4),
Monarch, ISO B5, Youkei 2, Youkei 4
Other sizes:
Portrait - 3 7/8 to 11 5/8" or 98 to 297 mm
Landscape - 5 7/8 to 17" or 148 to 432 mm 10
Transparency (OHP film) A4, A4-R, Letter, Letter-R 10
Criteria Specifications
Weight Cassettes: 60 to 220 g/m 2
Multi purpose tray: 60 to 300 g/m 2
Thickness 0.086 to 0.110 mm
Dimensional accuracy ±0.7 mm
Squareness of corners 90° ±0.2°
Moisture content 4 to 6%
Pulp content 80% or more
Supported types Supported paper sizes No. of sheets