beautypg.com

Network, Host name, Tcp/ip – TA Triumph-Adler DC 2435 User Manual

Page 392: Network -94, E 9-94), The network on 9-94

background image

Default Setting (System Menu)

9-94

Network

The following network settings are available.

Host Name …9-94
TCP/IP9-94
TCP/IP (IPv4) Setup …9-95
TCP/IP (IPv6) Setup …9-96
Protocol Detail …9-98
NetWare9-99
AppleTalk …9-99
WSD Scan …9-100
WSD Print …9-100
Enhanced WSD …9-100
Enhanced WSD (SSL) …9-101
Secure Protocol …9-101
IPSec …9-105
LAN Interface …9-106
Restart Network …9-106

Host Name

Check the host name of the machine. Use the procedure below.

1

Press the System Menu key.

2

Press [System], [Next] of Network. Check the host name displayed under Host Name.

TCP/IP

Select whether or not to use TCP/IP. The default setting is Off.

IMPORTANT:

After changing the setting, restart the network from the system menu, or turn the machine OFF

and then ON. For detailed information on restarting the network, refer to Restart Network on page 9-106.

Use the procedure below.

1

Press the System Menu key.

2

Press [System], [Next] of Network and then [Next] of TCP/IP Setting.

3

Press [Change] of TCP/IP.

4

Press [On] or [Off] and then press [OK].

This manual is related to the following products: