HEIDENHAIN TNC 620 (34056x-04) Cycle programming - Manual (Page 180)

Fixed Cycles: Contour Pocket
7.5 PILOT DRILLING (Cycle 21, DIN/ISO: G121, software option 19)
7
180
TNC 620 | User's Manual Cycle Programming | 5/2013
Cycle parameters
Plunging depth Q10 (incremental): Dimension
by which the tool drills in each infeed (negative
sign for negative working direction). Input range
-99999.9999 to 99999.9999
Feed rate for plunging Q11: Traversing speed of
the tool when plunging into the workpiece in mm/
min. Input range 0 to 99999.9999 alternatively
FAUTO, FU, FZ
Rough-out tool number/name Q13 or QS13:
Number or name of rough-out tool. Input range 0
to 32767.9 if a number is entered; maximum 16
characters if a name is entered.
NC blocks
58 CYCL DEF 21 PILOT DRILLING
Q10=+5 ;PLUNGING DEPTH
Q11=100 ;FEED RATE FOR
PLNGNG
Q13=1 ;ROUGH-OUT TOOL