Grass Valley DD35 Family v.3.1.5 User Manual
Page 90

2. Panel Operation
DD35 Production Switcher
2 – 56
Operating Instructions – Rev. 16 / 10.2001
2.8.2
FUNCTIONAL RESTRICTIONS
– no Chroma Key
– no Fill Matte
– no Border
These keyers are optional external boxes. They are used as Luminance and Linear
Keyers. The remote control comprises
– Cut in, Cut out
– Auto fade in, Auto fade out. Transition type is MIX only
– Clip/Gain (if possible with the specific device)
For installation of DSK4...DSK6 refer to the DD35 Planning & Installation Manual.
2.8.3
DSK PREVIEW MODE
In the default mode, Look Ahead Preview is active. If in this mode delegation is
changed, the actual Key Preview is disabled.
DSK Preview modes
Physical Outputs
Mainframe P/P
P/P Preview:
Norm (Standard)
P/P Preview:
Permanent DSK Preview
(2)
PGM
Program Out
Program Out
CLEAN
Cleanfeed 1 Out
Cleanfeed 1 Out
P/P PVW
Look Ahead PVW
DSK PVW
DP
FxSend /
Cleanfeed 2 / PST
(1)
FxSend /
Cleanfeed 2 / PST
(1)
(1)
in settings: Cleanfeed 2 or PST Bus: no DVE loop possible
(2)
no DVE loop, no Look Ahead preview, no transition preview
possible in this configuration
Look Ahead Preview and Permanent Key Preview are both available in all M/Es.
Look Ahead Preview Mode
If no Key Preview is active, the Key PVW button will not be lit. If it is pressed, the
Color Preview will be switched on and the Key PVW button will be lit. Pressing this
button once more switches on the the BlackWhite Preview and the button will still
be lit. Pressing the button again switches off the Preview (no Key Preview for this
M/E will be active anymore) and the lamp in the button will go out.
It is always the Key Preview for the actually delegated keyer which is switched.
When re-delegating to another keyer, a possibly active preview of the previously
delegated keyer will be switched off. The preview of the newly delegated keyer will
also be switched of. When delegating to the same keyer (i.e. to that one which is
already active), nothing will happen, i.e. the preview state (Off, Color, BlackWhite)
is not changed.
DSK3
2nd DSK
DSK4 ... DSK6