Grass Valley DD35 Family v.3.1.5 - Manual (Page 234)

3. Menu Operation DD35 Production Switcher
3 – 82 Operating Instructions – Rev. 16 / 10.2001
Selecting Set Rotation delegates the digipots to adjust the wipe pattern rotation.
The following adjustments are possible (if the Rotation modifier is activated):
Angle setting a fixed rotation angle
SPD setting the rotation speed
COUP rotation angle depending on the transition (Fader, Auto). The
number of rotations can be selected with this control.
Selecting Reset sets the Rotation modifier to “normal”.
Selecting Set Multi delegates the digipots to adjust the number of the multiplica-
tion.
The following adjustments are possible (if the Multi modifier is activated):
X-Multi Changes the number of points in the star)
O-Multi Changes the number of wipes inside a closed wipe (e.g. circles)
H-Multi Changes the number of patterns on the horicontal plane
V-Multi Changes the number of patterns on the vertical plane
Selecting Reset sets the Multi modifier to “zero”
Selecting Set Modulate delegates the digipots to adjust the wipe edge modulation.
The following adjustments are possible (if the Modulate modifier is activated):
Ampl modulation amplitude
Speed modulation speed
Freq modulation frequency
Shape modulation shape (square, triangle, sinewave).
Set Rotation
Set Multi
Set Modulate