Grass Valley DD35 Family v.3.1.5 - Manual (Page 59)

2. Panel Operation DD35 Production Switcher
2 – 25 Operating Instructions – Rev. 16 / 10.2001
DVE DVE permits recalling and running DVE effects from the switcher in the same way
as wipe effects.
The various effects must be programmed on the respective DVE before and can
then be recalled with the wipe pattern selection keypad in the Wipe panel when the
associated display shows DVE1 or DVE2.
For further information and important notes on DVE control please refer to the sec-
tion DVE Integration.
Note: Please note that the DVE transition type can only be effective for one
picture component.
The Transition Type displays indicate the component that is used for DVE transi-
tion, especially PGM and PST.
––– DVE DVE transition in PGM
DVE ––– DVE transition in PST
MultiMix With MultiMix you can select different transition types for individual picture compo-
nents and then fade them together. For instance, Mix can be selected for the back-
ground transition, Wipe 2 for the first keyer and Wipe 1 for the second keyer, and
the different types of transition can be executed simultaneously in one transition.
Adjusting different transition types:
D
Select the picture component with BGD, Key 1, Key 2 or Key 3.
D
Now select the desired transition type with Add, DVE, Mix or Wipe (n).
The selected transition type will be indicated above the next-transition buttons.
D
Select the respective transition type for the other picture components in the
same way. Turn off the transition type by pushing the activated transition but-
tons.
D
Pressing BGD, Key 1, Key 2 or Key 3 (or any combination) simultaneously ac-
tivates
the corresponding picture components for the next transition.
Note: Please note that the transition type Add will result in Mix type for Key
1/2/3. Multimix is possible when no transition type button is enabled.