Grass Valley DD35 Family v.3.1.5 - Manual (Page 33)

1. General DD35 Production Switcher
1 – 19 Operating Instructions – Rev. 16 / 10.2001
1.5.8 EXT. DSK PROTOCOL – EASY KEY (OXTEL), DS 0117
D
Allows integration of Downstream Key command codes for external unit con-
trol. Is extension to internal DSK system. Up to 3 channels (units of same type)
can be controlled with the purchased license. It’s up to the user to setup the
DSK units in cascade or parallel video processing mode and to feed signals
from switcher Aux buses or from an independent, external Routing system.
Supported parameters are: Clip, Gain, Transparency, Cut and Auto.
1.5.9 EXTERNAL DSK PROTOCOL – CDK104 (ROSS), DS 0119
D
Amount of control similar to DS 0117.
D
Additional functionality: Box Masking, FTB
1.5.10 EXT. ROUTER PROTOCOL – VENUS, MARS, DS 0120
D
Enables remote control of input source selection of up to 15 outputs from an
external Philips router (ASCII protocol).
1.5.11 EXTERNAL ROUTER PROTOCOL – SANDAR, DS 0121
D
Enables remote control of input source selection of up to 15 outputs from an
external Sandar router. Includes Mnemonic Transfer.
1.5.12 NAME FOLLOW VIDEOTM – VENUS, DS 0123
D
Is needed for transfer of mnemonics names from extern router (or integrated
control system, e.g. Jupiter ...) into the switcher mnemonics (M/Es, Aux, P/P).
1.5.13 UNDER MONITOR DISPLAY PROTOCOL – PHILIPS, DS 0126
D
Enables transmission of DD35’s mnemonics names into Philips Under Monitor
Displays of type RP1, RP2 and RP3 UMD. Names assigned in switcher can be
4 and 8 characters long (new !). Up to 8 digits supported.
1.5.14 AUX PANEL – PHILIPS CP-300/330/3020/321, DS 0129
D
Allows for remote control of switcher Aux buses by separated keyboard units
(buttons) of type CP300.. etc. Uses MPK protocol. Assignment of remote key-
board buttons can be altered with changing configuration setups per applica-
tion.
Aux buses individually programmable.
1.5.15 AUX–BUS PROTOCOL, DS 0133
D
For AUX Bus control e.g. from DVEs