Grass Valley DD35 Family v.3.1.5 - Manual (Page 361)

3. Menu Operation DD35 Production Switcher
3 – 209 Operating Instructions – Rev. 16 / 10.2001
3.17.1.4 Config Copy Simple Menu
In the Copy Simple menu, whole applications can be copied. The menu shows lists
for source and destination. In the lists, the available storage devices, the stored ap-
plications or the connected devices of an application can be shown.
After copying an application from another switcher, the application might use de-
vices which are not available here. The devices can be changed with the Change
Device button.
Internal harddisk and floppy drive are shown in the two selection areas. There are
all drives listed, which are activated in the Install / System / Drivers menu
The applications of the selected drive are listed in the two selection areas.
The devices of the selected application are shown.
Allocates a different device (E-Box, Panel) for the currently selected application in
the listbox. A list of currently available devices is shown. Select the desired device.
After copying an application from another switcher, the application might use de-
vices which are not available here. The button is enabled only when Show Devices
is selected.
Show Drive
Show Application
Show Devices
Change Devices