Grass Valley DD35 Family v.3.1.5 - Manual (Page 288)

3. Menu Operation DD35 Production Switcher
3 – 136 Operating Instructions – Rev. 16 / 10.2001
3.12.1.2 Function Buttons
Menu delegation to M/E1, M/E2, M/E3 or P/P.
For details refer to section Introduction.
Reset the values for a single bus of the selected M/E to their default value.
Reset the values for all busses of the selected ME to their default values.
Switched the color on/off completely separate for each bus.
For details refer to section Introduction.
The button serve to activate the bus correction and delegates the digipots to the
parameters Bright, Contr, Sat and Balance.
Note: If Bus Correction for PGM bus and/or PST bus is selected, the
two settings are exchanged at the end of a fading.
Application:
Color/BlackWhite fading of the same picture source.
For details refer to section Introduction.
Delegate
Reset Bus
Reset M/E
Col. off
Menu Lock
PGM
PST
Key1 (DSK1)
Key2 (DSK2)
Digits