Grass Valley DD35 Family v.3.1.5 - Manual (Page 26)

1. General DD35 Production Switcher
1 – 12 Operating Instructions – Rev. 16 / 10.2001
1.2.4 2 M/E PLUS P/P CONTROL PANEL RPS 35-3
D
Control panel set with 24 input source buttons
D
4 separate modules
1.2.4.1 Options (initial order only)
Input Mnemonics Extension 2 M/Es RC 2363
D
4-digit LED Display for the mixer banks. The mnemonics display for the AUX
bus selection and the P/P stage comes as standard.
Redundant Power Supply Panel RC 2376
D
Common redundant power supply incl. automatic switch-over for all panel.
Separate power supply cords. In case of failure or switch-over, a warning is
given on panel (DIAGN) and GUI and optional using a GP Output (later orders
possible).
All-in-one Mounting Frame Set for RPS 35-3 RC 2360
D
Is needed when all delivered, separated panel modules have to be combined
for a single unit. This mainly applies to studio desks not having a tilted back wall.
The set contains mounting flanges and facings varnished in dark grey, where
in the long RPA, RPV and RPW modules can be fitted in for attachment to the
RPD35 base panel. A special tilting mechanism is provided for the display mod-
ule’s viewing angle. Individually adjustable and lockable.