Grass Valley DD35 Family v.3.1.5 - Manual (Page 41)

2. Panel Operation DD35 Production Switcher
2 – 7 Operating Instructions – Rev. 16 / 10.2001
2.2.2 MAKE MEMO OPERATION
2.2.2.1 MACRO GENERATION WITH THE PANEL BUTTONS
MaKE Memo
t
is a new feature. It can store commands as macros (e.g. Cut, Auto,
GPO trigger, etc.). By inserting Pause between commands it can also store a
macro sequence. The difference between TiM/E Memo with snapshots and time-
lines to MaKE Memo
t
is, that TiM/E Memo stores states and sequences of states,
MaKE Memo t stores commands and sequences of commands.
For recalling the stored macros, the P/P source selection panel is used. The MaKE
button delegates the P/P keyer bus to the MaKE Memo
t
function.
2nd
MaKE
ME2 ME3 ME1
Aux
Rec Ins-P Del
Macro or Aux Selection
MaKE ...
Example: Part of the RPD 35-4 panel
Record a macro
D
Press MaKE button.
D
Press ME1/Rec button and hold it down.
D
Select the macro button on the key bus row of the P/P stage. The selected key
bus button is now blinking (record mode). If a macro was already stored in this
position, it will be overwritten.
D
Press the selected button on the key bus again to stop and store the recording.
Insert Pause During macro recording, pauses can be inserted:
D
Press ME2/Ins-P button and hold it down. The key bus row is switched into the
”Pause Mode”, i.e. the display of the individual buttons offer different times for
selection (e.g. 1.3s for 1.3 seconds).
Pressing a button adds the corresponding time as a pause to the recorded
macro. By selecting the button 2nd or 3rd, the “Pause Mode” offers still a larger
number of time values for selection. When selecting several time values in suc-
cession without pressing another button in between, the sum of the corre-
sponding times will be added as a pause.