Grass Valley DD35 Family v.3.1.5 - Manual (Page 270)

3. Menu Operation DD35 Production Switcher
3 – 118 Operating Instructions – Rev. 16 / 10.2001
For details refer to section Introduction.
Flat matte 1 selects matte 1 as output.
Flat matte 2 selects matte 2 as output.
Selecting Wash serves to select a matte that is composed of a color wash between
matte 1 and matte 2.
If only the wash button lights up, it is possible to change the color wash individually
with the Softness, Position, and Angle controls.
The Softness control permits adjusting the width of the transition between the two
colors. The Position control serves to shift the position of the transition. With the
Angle control, the transition angle can be rotated.
Select Matte 1 or Matte 2 if you wish to adjust the matte with the Hue, Chroma,
and Luminance controls. Select Wash (upper row) to adjust Softness, Position,
and Angle.
For details refer to section Introduction.
Menu Lock
Flat Matte 1
Flat Matte 2
Wash
Digits