Grass Valley DD35 Family v.3.1.5 - Manual (Page 476)

4. Setup and Maintenance DD35 Production Switcher
4 – 10 Operating Instructions – Rev. 16 / 10.2001
Disable / enable fader.
First select the M/E with the buttons Store
and Bank, subsequently enable or disable
the fader of the M/E with the buttons
T–Dur/Free% and Key/Inhib.
Options: TransPP, TransME1 .. ME3,
MachCtl
Using the key pad or the buttons
T–Dur/Free% and Key/Inhib, adjust the
sensitivity of the digipots.
Confirm item with Enter.
Using the key pad or the buttons
T–Dur/Free% and Key/Inhib, adjust the
sensitivity of the trackballs.
Confirm item with Enter.
M/E TiM/E Memo delegation.
Delegate the running application
(”App0” Master TiM/E-Memo) to
M/E 1 ... M/E 2, PP
Example:
Memo – cp = ME1 : App0
With this setting, the Master TiM/E Memo
is passed to the M/E 1 TiM/E Memo.
Factory setting: APP0
Applications APP1 ... 4 have no function.
Copying / transfer complete M/E setups
into another M/E
Example:
Transfer M/E 1 setups to M/E 3
Press the Transdur button of M/E 1 (hold
down), subsequently press the Transdur
button of M/E 3 and wait until a beep will
confirm the copy.
Options: on / off
F a d e r T r a n s P P :
D i g i p o t G a i n : %
T B a l l G a i n
M e m o – c p = P P :
F a s t C o p y: