Grass Valley DD35 Family v.3.1.5 User Manual
Page 132
2. Panel Operation
DD35 Production Switcher
2 – 98
Operating Instructions – Rev. 16 / 10.2001
The functionality depends on the type of the currently selected timeline object.
KF
The selected keyframe is changed to the current state
of the switcher.
LOOP
Change of the loop counter (000 = endless loop).
ELOOP
Change of the loop counter (000 = endless loop).
Deletes the currently selected timeline object. Depending on the type of the time-
line object there are the following relationships.
LOOP
The related ELOOP object will also be deleted.
ELOOP
The related LOOP object will also be deleted.
Inserts a GPO trigger object at the current cursor position.
Changes the hold time of the selected snapshot or keyframe. The default hold time
is always 0 frames.
Changes the transition time of the selected keyframe object. The default transition
time is set to the current transition duration of snapshot dissolves.
Changes the trajectory of the selected transition object. Possible are Linear,
SLinear and Smooth (not yet implemented).
Inserts a snapshot object into the timeline. If the button is pressed more than once
the next existing snapshot is displayed for selection.
The Undo function is enabled in the Edit mode and serves the abortion of a running
edit operation without changing in the timeline.
If, for instance, the button Undo is pressed in the edit mode, an Undo dialog is dis-
played:
Press Undo again
return to the edit mode
Press Enter
abortion of edit mode without saving
The button
z
permits a successive selection of the individual objects of a timeline.
Changes the cursor position to the previous object.
With the VIEW function enabled (button lights up) the switcher is switched to the
status stored in the keyframe.
The button
!
permits a successive selection of the individual objects of a timeline.
Changes the cursor position to the next (following) object.
Inserts a previously stored timeline into the timeline.
8 / MOD
9 / DEL
Bank 0 / GPO
4 / HTM
5 / TRTM
6 / TRAJ
Bank 1 / SNAP
Undo
1 /
z
2 / VIEW
3 /
!
Bank 2 / TIML