Grass Valley DD35 Family v.3.1.5 - Manual (Page 440)

3. Menu Operation DD35 Production Switcher
3 – 288 Operating Instructions – Rev. 16 / 10.2001
3.21.4.2 Dialog Buttons
When selected, the associated channel is preset for function controls.
Since only the values of one channel can be displayed at a time (the colored name
in the inner window),
You may not see a change in values, because e.g. the display is set for the values
of DVx 1, but only DVx 2 and DVx 3 are selected. In this case channel 2 + 3 will
be controlled, but the value change will not be reflected.
To change the channel to be displayed double press (double click) the according
channel. This will put the channel to display and deselect all other channels.
Depending on the type of index card the channel to be displayed can only be chan-
nel 1 – 4 (local channel) or global channel. If you select an index card of that type,
the channel to be displayed is forced accordingly.
Forced local channel:
D
INPUT
D
2–D
D
3–D
D
CROP
D
KEY
D
FX–OUT
D
COLORS
D
COMBINER
Forced global channel:
D
PRIORITY
D
CUBE/SLAB
D
GLOBAL
Don’t care:
D
COPY
D
SAVE/RECALL
D
MISC
D
TIMELINE
D
SETUP
Return to the previous menu. For details refer to section Introduction.
DVx 1
DVx 2
DVx 3
DVx 4
Previous Menu