Grass Valley DD35 Family v.3.1.5 - Manual (Page 235)

3. Menu Operation DD35 Production Switcher
3 – 83 Operating Instructions – Rev. 16 / 10.2001
In addition to these adjustments the wipe edge modulation may also be influenced
with the possibilities:
H only horizontal wipe edge modulation only
V only vertical wipe edge modulation only
H+V vertical and horizontal wipe edge modulation
Selecting Lock serves for a locked modulation, i.e. the modulation does not vary
but produces a stationary picture.
Selecting Softness Border delegates the digipots to adjust the wipe pattern border
function.
The following adjustments are possible (if the Border modifier is activated):
Width border width adjustment. The border width may
be adjusted by clockwise or counter-clockwise
rotation.
If the border is made transparent with Opac, the
direction of rotation of the border width control
determines which picture component will be seen
in the border.
Opac adjustment of the transparency
If the Softness modifier is also enabled, the following additional adjustments are
possible:
Soft adjustment of the border softness
Symm adjustment of the softness symmetry.
Selecting Reset sets the Softness and Border modifier to “normal”.
Lock
Softness Border