Grass Valley DD35 Family v.3.1.5 - Manual (Page 374)

3. Menu Operation DD35 Production Switcher
3 – 222 Operating Instructions – Rev. 16 / 10.2001
GPI Functions:
D
None:GPI has no function.
D
Command: User-defined command code. See note below.
D
Misc: Switch over the Video Standard or Video Format
Video Format (4x3, 16x9)
Inactive = 4x3
Active = 16x9
VideoStandard (625/50, 525/60)
(Example für DD35)
Inactive = 625/50
Active = 525/60
This is a very redundant function because the switcher can auto detect the
video standard from the signal at the reference input.
See also Install/EBox/Timing menu.
D
Autotransition: Starting Auto Transition, selected in the pop-up list
D
Recall Snapshot: Starting Snapshot, selected in the pop-up list
D
M/E1: Starting function, selected in the pop-up list
D
M/E2: Starting function, selected in the pop-up list
D
M/E3: Starting function, selected in the pop-up list
D
PP: Starting function, selected in the pop-up list
D
Stores: Starting Video Store or MPR Store, selected in the pop-up list
Note:
In the Comand mode, user defined commands are selected being transmitted to
the switcher at a received trigger event. Selecting Command enables to directly
enter the command code. See for this purpose the DD35 command set, which can
be obtained from the manufacturer. The other selections are defined in text files
GPICMDMF.TXT (mainframe) and GPICMDCP.TXT (panel). These files are con-
tained in the directory c:/programme/dd35/bin.
For entry, a special syntax has to be considered. It is possible to add predefined
parameters to the command, the available commands are listed in these files. For
editing, it is best to copy and match existing entries. In any case, the DD35 com-
mand set is required.