Grass Valley DD35 Family v.3.1.5 - Manual (Page 191)

3. Menu Operation DD35 Production Switcher
3 – 39 Operating Instructions – Rev. 16 / 10.2001
The Limit set and Limit on buttons serve to create reproducible partial transitions.
This mode is possible with all types of transitions.
Limit set permits storing the desired value set with the fader.
Limit on enables the mode. Any transition with Cut or Auto and any manual transi-
tion with the fader is only executed up to the value previously defined with Limit
set. If the transition is made with the fader, the yellow arrow to the left of the fader
does not change the direction when the fader is moved to its end position, thus indi-
cating that the transition is not completed.
If Limit on is switched off at the point defined by Limit set, a jerk free transition to
the next contribution can be made with the fader. The remaining transition length
is then stretched to the full fader path.
For details refer to section Introduction.
Limit:
Set
Limit:
On
Digits