Grass Valley DD35 Family v.3.1.5 - Manual (Page 393)

3. Menu Operation DD35 Production Switcher
3 – 241 Operating Instructions – Rev. 16 / 10.2001
Editing the Enviro.ini file
D
Establish with WS-FTP a connection to the mainframe host controller. For this
purpose, enter in WS-FTP Profile the corresponding address.
D
Call directory “/flash”.
D
Files in the directory are shown in the right-hand window of WS-FTP:
D
Copy file ”Environ.ini” from the host flash disk to the PC.
D
Edit file ”Environ.ini” with a window editor.
D
Save the old file on the host flash disk ”Environ.ini” by Rename into ”Envi-
ron.sav”. The extensions ”.ini”, ”.old” and ”.new” are reserved and must not
be used for backup names.
D
Copy the changed file ”Environ.ini” from the PC to the host flash disk in direc-
tory ”/flash”.
D
After storing the file, a RESET has to be initiated at host and RSE to read in
”Environ.ini” again.
Between storage and RESET, no changes have to be made at the installation
setting of the switcher (e.g. menu settings) since, otherwise, the file being just
stored will be overwritten with old values!
After restart of the switcher, the changing is ready.