Grass Valley DD35 Family v.3.1.5 - Manual (Page 88)

2. Panel Operation DD35 Production Switcher
2 – 54 Operating Instructions – Rev. 16 / 10.2001
2.8.1.2 DSK Operating Mode 2
Coupl
1 DSK1 2 DSK2 3 DSK3
Trans
dur
CAM1 VTR1 EXT1
Cut Cut Cut
Auto Auto Auto
4 DSK4 5 DSK5 6 DSK6
Coupl Coupl
Trans
dur
Trans
dur
2nd
DSK
Cut Press Cut if you wish to execute a transition as hard cut.
Auto Press Auto to execute a transition of the type selected in the Transition panel using
the preset transition duration. If the Auto key is pressed again, the transition is
aborted. For DSK4..DSK6 only MIX is possible.
Coupl The Coupl function allows coupling the transitions of several DSKs. Pressing Cut
or Auto for one of the coupled DSKs starts the transition for all coupled DSKs.
In case of Auto, the Trans Dur need not be equal.
When the transition duration for one of the coupled DSKs is modified, the transition
duration for all coupled DSKs is set to the same value.
Indicators 1..6 The coupled DSKs are indicated by the Coupl button and the indicators 1..6.
2nd DSK Pressing 2nd DSK changes delegation of the DSK transition section from
DSK1 ... DSK3 to DSK4 ... DSK6 and vice versa.