Grass Valley DD35 Family v.3.1.5 - Manual (Page 134)

2. Panel Operation DD35 Production Switcher
2 – 100 Operating Instructions – Rev. 16 / 10.2001
2.15.4.5 Changing the Hold Time of a Snapshot or Keyframe
1. Select Keyframe / Snapshot (button
z
and
!
)
2. Press HTM
3. Enter hold time with numeric keypad
4. Press Enter
Note: Errors can be deleted with Clear.
2.15.4.6 Changing the Transition Time of a Snapshot or Keyframe
1. Select transition object (button
z
and
!
)
2. Press TRTM
3. Enter transition time with numeric keypad
4. Press Enter
Note: Errors can be deleted with Clear.
2.15.4.7 Inserting a Snapshot
1. Select the timeline object before which the new snapshot is to be inserted (but-
ton z and ! ).
2. Press Bank1 / SNAP
3. Enter the snapshot register number with the numeric key pad or press Bank1
/ SNAP again to select the next snapshot
4. Press Enter
Note: Errors can be deleted with Clear.
2.15.4.8 Inserting a Loop in a Timeline
If a loop is inserted with the TiME Memo control panel section always an endless
loop (loop counter = 000) is inserted for default. To change the loop counter follow
the steps under section Modifying A Loop.
New:
It’s possible to insert loops (max. 99) into other loops. This functionality is only avail-
able with the menu operation.