Grass Valley DD35 Family v.3.1.5 - Manual (Page 404)

3. Menu Operation DD35 Production Switcher
3 – 252 Operating Instructions – Rev. 16 / 10.2001
MaKE Memo: Starting a macro (0 .. 99).
Note:
In the COMMAND mode, user defined commands are selected being transmitted
to the switcher at a received trigger event. Selecting COMMAND enables to directly
enter the command code. See for this purpose the DD35 command set, which can
be obtained from the manufacturer. The other selections are defined in text files
GPICMDMF.TXT (mainframe) and GPICMDCP.TXT (panel). These files are con-
tained in the directory c:/programme/dd35/bin.
For entry, a special syntax has to be considered. It is possible to add predefined
parameters to the command, the available commands are listed in these files. For
editing, it is best to copy and match existing entries. In any case, the DD35 com-
mand set is required.