Grass Valley DD35 Family v.3.1.5 User Manual

Page 32

1. General

DD35 Production Switcher

1 – 18

Operating Instructions – Rev. 16 / 10.2001

1.5

SHORT DESCRIPTION OF BASIC PROTOCOL DRIVER SOFTWARE

The following software protocol drivers are included in the basic package of the
DD35 switchers:

1.5.1

EDIT PROTOCOL – GVG200, DS 0110

Edit Protocol – GVG / model 200 emulation. Allows DD35 control via edit sys-
tem. Amount of control only in the range of what is possible on a GVG200 swit-
cher (e.g. 20 inputs, 2 M/Es ...), without E-MEMTM Register up/download (swit-
cher learn). E.g. Sony BVE, GVG VPE, etc.
Also often used for remote control of switcher AUX buses for A/B side switch
of foreground and background sources within DVE moves (e.g. DVEous ...).

1.5.2

EDIT PROTOCOL – DD30, DS 0111

Edit Protocol – Philips / DD30 for edit controllers with adapted driver for
DD10/20/30 switchers, e.g. CMX Omni, Accom Axial.

1.5.3

EDIT PROTOCOL – DD35, DS 0132

Edit Protocol: DD35. Allows complete control with proprietary command codes.
Currently (besides Accom Axial with special software) no edit system is known,
controlling DD35 with these commands).

1.5.4

DVE PROTOCOL – DVEOUS, DS 0112

DVE Protocol – Scitex DVEous, A57, A53D. Allows integration of DVE being
controlled from switcher. E.g. good for DVE background transitions and effects
selection via switcher wipe module – as if it were a built in wipe generator.

1.5.5

DVE PROTOCOL – QUESTECH TENX, DS 0113

Amount of control similar to DS 0112.

1.5.6

DVE PROTOCOL – PINNACLE DVEXTREME, DS 0113

Amount of control similar to DS 0112.

1.5.7

DVE PROTOCOL – SONY DME 7000, DS 0115

Amount of control similar to DS 0112.