Grass Valley DD35 Family v.3.1.5 - Manual (Page 463)

3. Menu Operation DD35 Production Switcher
3 – 311 Operating Instructions – Rev. 16 / 10.2001
3.21.5.16Setup Index Card
Index card with 1 pages: Local Channels
Page Local Channels
Channel 1 – Channel 4
When you start creating an effect in the workbuffer, this is the first page to set.
The possible modes per channel are:
F
unused
F
single
F pair
F
triple (not for channel 4)
F
quadruple
The simple way:
If you choose to work with the DVx as one device only (this is the way you work with
common DVEs), you choice should be ”quadruple” for all 4 channels and global
channel used. If you need less channels for a certain effect, just set the size of the
channels not needed to zero. In this case the operation of the DVx is very simple,
but you are limited to one DVx–transition at a time.