Grass Valley DD35 Family v.3.1.5 - Manual (Page 46)

2. Functional Description DD35 Production Switcher
2 – 12 Operating Instructions – Rev. 16 / 10.2001
2.3.2 AUX BUS SOURCES
The Aux Buses bank permits the selection of the same signals as on Background
and Key buses. Additionally
D
PVW signals of all stages (M/E1 ... 3, P/P)
D
P/P output
D
Pre-processed Background Bus, Key Bus and Fill Bus signals (Preset/B,
PGM/A, Key1, Key2, Key3 in P/P only) of any stage.
2.3.3 AUX BUS DELEGATION
The button group Delegation delegates one of the buses to the Aux Bus buttons
row. Thus showing the respective status and enabling operation.
Aux10 Aux11 Aux12 Aux13 Aux14 Aux15
Mask
Bus1 Mask
Bus2
Mask
Bus3
Aux3 Aux4 Aux5 Aux6 Aux7
Mont Mont
Proc2
Video
Store Ext
Aux
Delegation
Proc1
Aux8 Aux9
Aux1 Aux2 Menu
2nd
Aux
The other statuses are stored internally and are automatically stored when another
Aux bus is selected.
Program, Preset and Key buses and the Aux buses can be coupled in any combina-
tion (for further details please refer to section Config menu).
Note:
Holding an input button pressed and then pressing one or more aux delegation but-
tons (Aux1, Aux2, ..., Mask Bus3) will set this input active for the delegated aux
buses. While the input button is pressed down no source hunting will be achtive.
This means, you can set all aux buses to the same input (e.g. Black). Press Black,
hold the button down, and than strike with your finger over all aux delegation but-
tons.