Grass Valley DD35 Family v.3.1.5 - Manual (Page 117)

2. Panel Operation DD35 Production Switcher
2 – 83 Operating Instructions – Rev. 16 / 10.2001
2.14.3.2 Cueing to Mark In
•
Press Goto (numeric keypad will highlight, see below).
•
Press Mark In.
2.14.3.3 Cueing to an arbitrary timecode
•
Press Goto (numeric keypad will highlight).
•
Enter the timecode.
•
Press Enter.
Note: Pressing Goto again switches off the timecode entry,
but will NOT cue somewhere.
2.14.4 GANG MACHINES
Up to 4 machines can be operated together in parallel (e.g. all on PLAY or all on
Rewind). The Gang mode can be freely selected in the Panel Setup: Die Gang-Be-
triebsart läßt sich dabei im Panel Setup frei wählen:
Gang mode A: When selecting the corresponding machines simultaneously
press the buttons MP1 ... MP4.
Gang mode B: Hold the button Rec down and then press the respective MP
button one after the other.