Grass Valley DD35 Family v.3.1.5 - Manual (Page 480)

4. Setup and Maintenance DD35 Production Switcher
4 – 14 Operating Instructions – Rev. 16 / 10.2001
Define operation mode for direct DSK tran-
sition buttons.
Options: 2nd level / 2nd function
Access to DSK 4...6 via shift button 2nd
DSK / direct access to DSK1..6, access to
T-Dur and Couple via shift button 2nd func-
tion.
Individual 2nd/3rd buttons per M/E bus
row.
Options: off / left / right / left+right
Confirm item with Enter.
Adjustment of the fader end-position
1. Fade Adj: Upper
Move all faders to the upper end-posi–
tion and confirm item with enter.
2. Fade Adj: Lower
Move all faders to the lower end-posi–
tion and confirm item with enter.
Enable / disable the Gang mode for the ma-
chine control.
Options: A, B (B is recommended)
The Simulcast mode should cause a con-
trol unit of the DD35 or HD to control also
a second Mainframe (Slave) beside the se-
lected Mainframe (Master). It is the aim to
synchronously produce a DD broadcast
also in HD as far as possible.
Options: Master, Slave, Both, Def
Enter a three-digit numerical value (can be
freely selected) as an address for the two
connected mainframes.
Confirm with Enter.
D s k T r n s D e l
S h f t B u P e r B u s
F a d e A d j
G a n g M o d e S e l : A
S i m u l c a s t :
S i m u l c a s t A d r :