Specifications, Operating power, Analog inputs – Basler Electric BE1-11m User Manual
Page 523: Rtd inputs
9424200996 Rev L
511
Figure 336. RTD Type Selection Screen
The source for the 49RTD protection elements can be set for RTD Group 1, 2, 3, 4, 5, 6, or 7. Refer to the
Resistance Temperature Detector (49RTD) Protection
chapter for information on setting 49RTD
protection elements.
Figure 337. RTD Configuration Block Screen
Specifications
Operating Power
Nominal ...................................... 125/250 Vac/dc
Range ......................................... 90 to 270 Vac or 90 to 300 Vdc
Maximum Consumption ............. 9 W
Analog Inputs
The RTD module contains four programmable analog inputs.
Rating ......................................... 4 to 20 mAdc or 0 to 10 Vdc (user-selectable)
RTD Inputs
The RTD module contains 12 programmable RTD inputs.
User-Selectable Types ............... 100
Ω Platinum (DIN43760), 10 Ω Copper, 100 Ω Nickel, or 120 Ω Nickel
Range .........................................
–50 to 250°C (–58 to 482°F)
Accuracy.....................................
±2°C (3.6°F)
Maximum Lead Length ............... 150 feet (4.25 km) with 22 AWG (0.326 mm
2
) wire
Sensing Current Level ................ 2.5 mA
Isolation ...................................... 35 Vpp
BE1-11m
RTD Module