Artesyn Centellis 4410 (AXP-1410) Installation and Use (July 2014) - Manual (Page 63)

Chapter 2
AXP 1410 Installation and Use (6806800H70L) 63
Site Preparation
2.1 Overview
The following sections help you to prepare system installation:
2.2 Site Planning Considerations
This section provides information to prepare the site and the shelf for installation.
2.2.1 Receiving and Unpacking the System
Shipment Inspection
To inspect the shipment perform the following steps:
1. Verify that you have received all items of your shipment.
Compare the shipment thoroughly with the delivery note.
2. Visually inspect the shelf to ensure that all of the connector pins are straight,
shrouds are properly seated, screws are tight, etc.
Section Gives Information On
Site Planning Considerations This section includes information on unpacking and
inspecting the system, requirements, technical data, and
other information you need to know before you start
system installation.
Site Planning Checklists This section provides checklists for site preparation.
Damage of Circuits
Electrostatic discharge and incorrect module installation and removal can damage circuits
or shorten their life.
Before touching the module or electronic components, make sure that you are working in
an ESD-safe environment.