Artesyn Centellis 4410 (AXP-1410) Installation and Use (July 2014) - Manual (Page 118)

Configuring and Operating the System
AXP 1410 Installation and Use (6806800H70L) 118
If there is no ATCA-F120 present in the system, the virtual IP address o backplane interfaces is
depends on the Shelf IP Connectivity Record #2
The backplane interface IP address of the shelf manager depends on the Shelf IP connectivity
Record #2. The default is as follows:
Changing the Virtual Shelf Manger IP Address for the Backplane Interface
To change this IP address, you need to modify the first three octets of the Shelf IP Connectivity
Record #1.
1. Change the first two octets of the IP address using the hpiship tool located on the shelf
manager. Use the option -h for help.
2. Reboot the system for the changes to take effect.
Example:
*Print current IP address settings
shm9s8:~ # hpiship
29 {ADVANCEDTCA_CHASSIS,9} Shelf Resource
4097 Shelf Manager IP Address 0
IP : 192.168.9.171
Gateway: 192.168.9.0
Submask: 255.255.255.0
8449 Shelf Manager IP Address 1
IP : 172.16.9.171
Shelf Manager State IP Address
Active 192.168.20.171
Standby 192.168.20.181
Table 5-2 Shelf IP Connectivity Record #2
Shelf IP Connectivity Record #2
IP Address 192.168.20.171
Default Gateway 192.168.20.170
Network Mask 255.255.255.0