Artesyn Centellis 4410 (AXP-1410) Installation and Use (July 2014) - Manual (Page 172)

FRU Information and Sensor Data Records
AXP 1410 Installation and Use (6806800H70L) 172
7.3 Power Entry Module Sensor Data Records
This section describes in detail all available IPMI sensors of the Power Entry Module.
7.3.1 PEM FRU Information
There are two PEMs; one at IPMB address 0x66 and another at IPMB address 0x68. The main
FRU (FRU 0) contains the FRU information of the PEM and it is the same for both PEMs (except
for the serial number). FRU 1 contains the FRU information that the active SAM caches as FRU
254 of IPMB address 0x20.
The FRU 0 information in a PEM4000 is represented in the next table.
Pigeon Point Shelf Manager Command Line Interpreter
66: FRU # 0, FRU Info
Common Header: Format Version = 1
Board Info Area:
Version = 1
Language Code = 25
Mfg Date/Time = Jun 1 00:00:00 2005 (4952160 minutes
since 1996)
Board Manufacturer = Network Power, Embedded Computing
Assertion Event Mask (bytes
15,16) 0x02, 0x00
Deassertion Event Mask (bytes
17,18) 0x02, 0x00
Discrete Reading Mask (bytes
19, 20) 0x03, 0x00 Supports 2 States
Reading Definition Assertion signals a fuse failure
Table 7-34 Sensor No. 29 FuseFail 48VB2 (continued)
Feature Raw Value/Description Interpreted Value